MONITORING SYSTEM MODEL- 2501

* Compact piezoelectoric sensor suitable for measuring application such as high temperature and high vibration level is selectable, 4 to 20mA output corresponding to vibration values is adjustable within a certain range. * AC output is available for waveform analysis using a FFT analyzer. * This unit is easily connectable to a recorder, indicator or data collector is a remote location. SPECIFICATIONS Maximum charge input ± 1000pC Maximum input capacity 10000pF Acceleration measurement( Measured value for detector 5pC/ m/ s2) Measuring range Any value is adjustable to maximum output of 20mA within the range of 20m/ s2 to 200m/ s2 Resolution 0.1m/ s2 Frequency range 3Hz- 10KHz( - 3dB) , 5Hz- 8KHz( - 1dB) 10Hz- 5KHz( ± 0.5dB) Low- pass filter IN& & 1KHz cut- off ( - 3dB) , Any frequencyis optionally available( within range of 50Hz to 5KHz) . OUT& · 10KHz cut- off( - 3dB) , Fixed Velocity measurement( Measured value for detector 5pC/ m/ s2) Measuring range Any value is adjustable to maximum output of 20mA within the range of 20m/ s to 200m/ s. Resolution 0.1mm/ s Frequency range 7Hz- 10KHz( - 3dB) , 10Hz- 6KHz( ± 1dB) Displacement measurement( Measured value for detector 5pC/ m/ s2) Measuring range Any value is adjustable to maximum output of 20mA within the range of 0.2mmp- p to 2mmp- p. Resolution 0.001mmp- p( 1¼ m) Frequency range 8Hz- 10KHz( - 3dB) , 10Hz- 700KHz( ± 1dB) DC output 4- 20mA, Load resistance& & 300© Detection& & AVE- PEAK Control. AC output ± 2V full scale ( fixed with full scale that is determined according to pick- up sensitivity) Accuracy 5% or less( 80Hz, 10m/ s2, sine wave, normal temp) Linearity 1% or less Diving power DC11V- 26V, 30mA Temp.& humidity range Operation; 0- 50° C, Storage: - 20° C- 70° C 90% RH or less Case material Aluminum alloy ( Neoprene packing) Component Device Converter cable: CA4612- 3m( 3m) Vibrasindo. Jakarta - Indonesia Phone : 021-29563045 ( hunting) Hp : 08156141954 Pin BB : 284152F7