A-511 WAND BORE TARGET

Descriptions: The Model A-511 Wand Bore Target is a single-axis, micrometer-adjustable target designed for measuring the center of large bores. It uses a fixture with two legs: a measuring leg, with an adjustable measuring tip, and a brace leg that is perpendicular to the measuring leg and ending in a T-shaped tip. The legs are supplied by the user, made from hollow steel tubing and cut to a length so that the distance from the tip of the measuring leg to the target center is approximately equal to the radius of the bore. The target' s micrometer provides the fine centering adjustment. The target head swivels to face the beam regardless of its direction, and the unit has a ten-foot cable that can be used with target extension cables to fit any size bore or working environment. To take bore alignment readings, the A-511 is set horizontally to the same side of each bore to be measured and is " zeroed out " using the micrometer. For vertical center measurements, the target measuring leg is then positioned vertically and the bore center measurement is taken by sweeping the target through " top-dead center " . For the horizontal measurement, the target measuring leg is set horizontally to the side opposite where the target was " zeroed out " . To find " top-dead center " the A-511 is swept though the " high point " ; in other words, the target is moved toward and away from the laser, along the centerline, and the highest reading is recorded. Applications: • Turbine and other bore alignment Features: • Light weight and capable of measuring bore radii from 6 " to 48 " + ( 150 mm to 1.2 M) . • Fast set up with very • .0001 " ( .0025 mm) resolution. • Provides live measurement data to show alignment moves as they are being made. • Uses standard, easy-to-locate conduit for measurement and brace legs. • Comes with 3 measurement tips for variations in measurement surface. Each tip has 4 " ( 101 mm) of adjustment range. Specifications: Weight: 1.25 lbs ( .56 kg) without legs Material: Target body: Aluminum Cable Length: Length: 10 feet ( 3 Meters) Connector: 8-pin CPC Micrometer Range: .500 " ( 12.7 mm) Target Cell Sensitivity: .0001 " ( .003 mm) Range: + / - .150 " ( + / - 3.8 mm) single axis Linearity: Within 5% Jakarta - Indonesia Phone : 021-29563045 ( hunting) Hp : 08156141954 Pin BB : 284152F7