Back to Top

Hi, Guest!
pt vibrasindo - condition monitoring & pdm solution

PT VIBRASINDO - Condition Monitoring & PdM Solution
pt vibrasindo - condition monitoring & pdm solution
PT VIBRASINDO - Condition Monitoring & PdM Solution

  LOKASI :  Kota Administrasi Jakarta Barat

Bergabung Selama :

BAGIKAN :   

Bagikan :
Kontak Kami  

Sensors and Transducers PT VIBRASINDO - Condition Monitoring & PdM Solution Terlengkap

BEST DEAL
Bently Nevada offers a very wide variety of vibration, position, speed, pressure and power sensors or transmitters, each designed to handle the rigors of industrial environments and many capable of being installed in hazardous areas when appropriate I.S. barriers, galvanic isolation, or other means are used. When your needs fall outside our standard product offering, our custom products engineering capabilities may be able to modify an existing product, or develop an entirely new one, to meet your needs.
330500 velomitor® piezo-velocity sensor

330500 Velomitor® Piezo-Velocity Sensor

This is the general-purpose version of our Velomitor transducer, useful for frequencies between 4.5 and 5, 000 Hz. Vibrasindo. Jakarta - Indonesia Phone : 021-29563045 ( hunting) Hp : 08156141954 Pin BB : 284152F7
CALL
proximity probe accessories

Proximity Probe Accessories

ecause Every Installation is not the Same, Proximity Probe Accessories that Get the Job Done Right From mounting brackets to conduit, junction boxes to cable protectors, we offer a complete line of proximity probe accessories to make installation and protection of transducers and their related wi
CALL
330505 low frequency velocity sensor

330505 Low Frequency Velocity Sensor

The Low Frequency Velocity Sensor is designed for hydro applications to detect vibration of the stator core, stator frame, and bearing supports. The sensor measures absolute vibration within the range of 0.5Hz to 1.0kHz, and its two-wire design uses moving-coil technology and embedded signal conditi
CALL
330525 velomitor xa piezo-velocity sensor

330525 Velomitor XA Piezo-Velocity Sensor

This is an environmentally hardened version of our 330500 Velomitor piezoelectric transducer, and is designed to meet NEMA 4X and IP65 ratings without the use of a housing. The piezoelectric sensor' s mounting stud uses pipe threads and does not require the transducer base to be flush with the machi
CALL
velomitor 350900 high-temperature velocity and acceleration sensor ( htvas)

Velomitor 350900 High-Temperature Velocity and Acceleration Sensor ( HTVAS)

Designed for use on a wide variety of gas turbines, the 350900 separates the high-temperature-rated sensing element from the signal conditioning electronics, with the two permanently connected via a flexible, mineral-insulated, hard-line cable. This robust arrangement allows mounting of the sensing
CALL
330530 radiation resistant velomitor

330530 Radiation Resistant Velomitor

new Bently Nevada Radiation Resistant Velomitor® sensor is specifically designed for the harsh environments that exist at nuclear power plants. Built for longer life and better performance, this sensor brings valuable machine information to your plant' s monitoring systems. Vibrasindo. Jakarta
CALL
330750 and 330752 high temperature velomitor systems

330750 and 330752 High Temperature Velomitor Systems

This design segregates the velocity sensor from the signal conditioning electronics by means of a hard-line cable, allowing the velocity sensor to be used in applications with temperatures considerably higher than our other Velomitor® transducers. Current versions of these sensors allow the sensing
CALL
190501 velomitor ct velocity transducer

190501 Velomitor CT Velocity Transducer

This is a low-frequency version of our Velomitor transducer, specifically designed for cooling tower monitoring applications with rotational speeds as low as 90 rpm. Vibrasindo. Jakarta - Indonesia Phone : 021-29563045 ( hunting) Hp : 08156141954 Pin BB : 284152F7
CALL
330400/ 330425 accelerometers

330400/ 330425 Accelerometers

The 330400 accelerometer is designed for general-purpose casing acceleration measurements and meets all requirements of API 670. The 330425 is identical except it provides a broader amplitude range ( 75 g peak) and a sensitivity of 25 mV/ g peak. Neither transducer requires an external interface mod
CALL
330450 high-temperature acceleration sensor ( htas)

330450 High-Temperature Acceleration Sensor ( HTAS)

The 330450 HTAS segregates the sensing element from the signal conditioning electronics, with the two permanently connected via a hard-line cable. This allows the sensing head to be mounted on surfaces with temperatures as high as + 400° C ( + 752° F) , while the signal conditioning electronics can
CALL
underwater probes

Underwater Probes

In submerged pump applications, the reason that equipment failures often take users by surprise is that the transducer systems in use were not installed in areas where they can collect meaningful data… i.e. underwater sensors, at the bottom of the pump. In order to allow customers the ability to pla
CALL
10798 optical pickup sensor

10798 Optical Pickup Sensor

When a machine develops problems that require use of diagnostic and analytical equipment, a Keyphasor® signal becomes necessary. For those machines that do not have permanent Keyphasor transducers installed, a temporary Keyphasor or optical pickup sensor is the next best choice. Optical transducers
CALL
990 test adaptor

990 Test Adaptor

The 990 test adapter inverts and isolates the output signal from 990, 991 and Seismic Transmitters, allowing you to interface our Bently Nevada transmitters to AC-powered diagnostic equipment ( such as ADRE® , oscilloscopes, and portable data collectors) while providing a high input impedance. The a
CALL
seismic transmitter

Seismic Transmitter

The Seismic Transmitter provides a 4-20 mA signal proportional to the 0-1 inch/ sec 0-pk velocity movement of a roller element bearing housing or machinery housing. It is designed for use on non-critical machines. The transmitter automatically integrates the acceleration signal on the machine to vib
CALL
990 & 991 transmitter housings

990 & 991 Transmitter Housings

For transmitter protection of our 990 and 991 series, we offer two sizes of housings for holding up to four transmitters. The housings protect the transmitters from physical abuse, moisture, and other environmental factors. The housings are constructed of AISI 304 series stainless steel and are d
CALL
991 thrust transmitter

991 Thrust Transmitter

The 991 Thrust Transmitter provides a 4-20 mA signal proportional to thrust position and is designed for use on smaller, non-critical machinery. Its primary use is on centrifugal air compressors with fluid-film thrust bearings. The 991 Thrust Transmitter can measure up to 1.2 mm or 50 mils of total
CALL
990 vibration transmitter

990 Vibration Transmitter

The 990 Vibration Transmitter provides a 4-20 mA signal proportional to relative vibration designed for use on smaller, non-critical machinery. Its primary use is on centrifugal air compressors with fluid-film bearings. While the 4-20 mA signal is used primarily for trending, the 990 transmitter als
CALL
valve position transducer ( lvdt)

Valve Position Transducer ( LVDT)

Some valve position measurements incorporate a linear, rather than rotary, mechanical linkage. Our AC LVDT is designed for such applications and is available in ranges from 1.0 to 28.0 inches ( 25 to 703 mm) . Vibrasindo, Jakarta - Indonesia Phone : 021-29563045 ( hunting) Hp : 081561419
CALL
3300 xl rotary position transducer ( rpt)

3300 XL Rotary Position Transducer ( RPT)

This innovative transducer incorporates a proximity probe observing an eccentric cam. The changing gap between probe tip and cam corresponds to degrees of rotation, and is specifically designed for valve position measurements. It is a superior alternative to older potentiometer transducers which hav
CALL
gas turbine combustion instability transducers

Gas Turbine Combustion Instability Transducers

The Bently Nevada 3500/ 64M Dynamic Pressure Monitor is specifically designed to monitor combustor pressure pulsations indicative of combustion instabilities ( " humming" ) in gas turbines. Through the use of our 350500 interface module, a variety of pressure transducers* designed for these applicat
CALL
  •     dari   2   halaman
    •